A door that's jumped its track can jam mid-cycle or hang at a dangerous angle. We realign or replace the damaged track section and check what knocked it loose in the first place.
Fixing the symptom without finding the cause usually means the same problem returns within weeks.
We don't eyeball alignment. Plumb and level get checked and confirmed before the job is done.
Track that's visibly bent or dented from impact gets replaced rather than hammered back into shape.
Vehicle impacts often bend both the track and the bracket mounting it to the frame. We check both.
Each service below is handled by a technician trained specifically for this kind of repair, not a generalist guessing at it.
Track sections are checked for plumb and level, then adjusted and secured to the frame at the correct tolerance.
Visibly bent or dented track sections get swapped for new standard sections rather than bent back into shape.
When a roller jumps the track mid-cycle, we reset it, then check whether worn rollers or a bent track edge caused it.
Collision damage often affects more than the visible dent. We check the full track and frame mounting system.
A track can only stay aligned if the brackets holding it are solid. We check and correct this on every off-track call.
Let us know if the door is jammed off-track or just running rough, and we'll prioritize accordingly.
Most off-track calls don't require a parts run thanks to a well-stocked van.
A full inspection prevents a quick patch that fails again within weeks.
The door is confirmed running smoothly on the corrected track before the job is closed out.
“Roller kept jumping the track every few days until they found the real cause, a bent bracket.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Storm debris jammed the track and bent it. Same-day repair got the door working again before dinner.”
Off-track issues typically trace back to hardware wear or a physical impact rather than opener problems.
We don't recommend it. Forcing a door back on the track can cause further damage or personal injury.
A section that's been bent once tends to weaken with repeated stress, so replacement is often the better call.
Cost depends on whether it's a simple realignment or a full track section replacement, confirmed as a flat price on-site.
Continuing to run an off-track door usually causes more damage to the track, rollers, and panel.
Most off-track repairs are completed same-day, typically within one to two hours on-site.
Same-day dispatch, upfront pricing, and a written warranty on every visit.
☎ Call +1-831-293-1591From one side of Mount Kisco to the other, dispatch is built to reach you quickly.
Embedded Map Placeholder for Mount Kisco, NY